Bio-organic fertilizer production from industrial waste and insightful analysis on release kinetics.

The present study has been designed to utilize industrial and agricultural solid waste for NPK (Nitrogen-Phosphorus-Potassium) bio-organic fertilizer production and its optimized use. The collagenic material of wet blue leather (WBL) from leather industry was used as nitrogen source, after H3PO4 acid-mediated chromium removal. Chicken meat-bone meal (CMBM) and rice husk ash (RHA) are abundantly available locally, had used as P, K, and Ca sources. The presence of N, P, K, Ca in the produced bio-organic NPK fertilizer were 10.76, 11.03, 3.41, 13.64, respectively as per mixing ratio of ingredients. In this study it was effect on the chili plant (Capsicum annuum L.) growth and revealed 1.15 and 1.03 fold higher plant growth, 1.40 and 1.18 fold higher total chlorophyll content than untreated soil (control), and chemical fertilizer. The liberation of fertilizers components from their source, transport of fertilizer components in the soil, and absorption in plant roots have been studied using mathematical models indicating the optimum fertilizer use for better productivity and to reduce loss of extra fertilizer and eutrophication. The formulation showed excellent water retention capability (3.2 L/kg), which might increase soil water availability to the plants and eventually reduce water demand and labour cost. DNA intercalation study proved there is no harm to use this fertilizer.

Chitosan based micro and nano-particulate delivery systems for bacterial prodigiosin: Optimization and toxicity in animal model system.

Prodigiosin, a red bacterial pigment is a compound with promising therapeutic properties. Major hindrance in applying prodigiosin in pharmaceutics is the insolubility in water and lack of bioavailability. This study aims to optimize two different types of chitosan based delivery systems, microspheres and nanoparticles for prodigiosin derived from Serratia marcescens NITDPER1 through Taguchi method and determine toxicity perspectives. The results revealed 0.5 % chitosan, 1 % sodium-alginate and 5 % CaCl2 optimum for microsphere and 0.1 % chitosan, 1.5 % TPP and 1.5 % acetic acid for nanoparticle with the entrapment efficiency and maximum release of 89.27 ± 1.2 % and 87.42 ± 1.9 % for microspheres and 96.36 ± 1.7 % and 91.58 ± 2.1 % for nanoparticles. Particle size was 93.03 ± 0.3 µm and 75.1 ± 1.4 nm for micro and nanoformulations. Kinetic parameters of release fitted best with Korsmeyer-Peppas model. Swelling index of microsphere and nanoparticles in pH 6.8 was 799 ± 7.1 % and 35.3 ± 2.1 % respectively. FESEM, FT-IR and XRD revealed spherical morphology, preservation of prodigiosin functional groups and amorphous nature of the formulations. Anticancer IC50 values were (µg mL-1) 11.7 ± 1.2, 10.8 ± 1.4 and 9.4 ± 0.8 for free prodigiosin, microsphere and nanoparticles respectively. Toxicity studies on HEK-293 cell line, Daphnia magna and zebrafish model determined non-toxic nature of the bacterial prodigiosin and its formulations revealing suitability of animal system application.

Comparative performance evaluation of chitosan based polymeric microspheres and nanoparticles as delivery system for bacterial ß-carotene derived from Planococcus sp. TRC1.

ß-carotene is a natural compound with immense healthcare benefits. To overcome insolubility and lack of stability which restricts its application, in this study, ß-carotene from Planococcus sp. TRC1 was entrapped into formulations of chitosan­sodium alginate microspheres (MF1, MF2 and MF3) and chitosan nanoparticles (NF1, NF2 and NF3). The maximum entrapment efficiency (%) and loading capacity (%) were 80.6 ± 4.28 and 26 ± 3.05 (MF2) and 92.1 ± 3.44 and 41.86 ± 4.65 (NF2) respectively. Korsmeyer-Peppas model showed best fit with release, revealing non-Fickian diffusion. Thermal and UV treatment exhibited higher activation energy (kJ/mol), 17.76 and 15.57 (MF2) and 37.03 and 19.33 (NF2) compared to free ß-carotene (3.7 and 3.9), uncovering enhanced stability. MF2 and NF2 revealed swelling index (%) 721 ± 1.7 and 18.1 ± 1.5 (pH 6.8) and particle size 69.5 ± 3.2 µm and 92 ± 2.5 nm respectively. FESEM, FT-IR, XRD and DSC depicted spherical morphology, intactness of functional groups and masking of crystallinity. The IC50 (µg ml-1) values for antioxidant and anticancer (A-549) activities were 33.1 ± 1.7, 45.1 ± 2.8, 39.3 ± 2.9 and 31.3 ± 1.7, 27.9 ± 2.4, 25.3 ± 2.2 for ß-carotene, MF2 and NF2 respectively with no significant cytotoxicity on HEK-293 cells and RBCs (p > 0.05). This comparative study of microspheres and nanoparticles may allow the diverse applications of an unconventional bacterial ß-carotene with promising stability and efficacies.

Transforming wet blue leather and potato peel into an eco-friendly bio-organic NPK fertilizer for intensifying crop productivity and retrieving value-added recyclable chromium salts.

An attempt has been made to address two important issues, the solid waste management of leather industry and soil fertility. The SEM images revealed altered surface-morphology.The EDS elemental analysis exhibited presence of about 13.2% nitrogen (N), 50.56% carbon (C), 2.69% phosphorus (P) in the collagenous material of wet blue leather (WBL) after chromium removal. In potato peel biochar (PPB) prepared the EDS analysis corroborated the presence of N P K in 5%, 1.4% and 21.64% respectively. In the formulated bio-organic NPK fertilizer, using chromium free WBL and PPB, the percentage of N, P, K, was in 13.10, 2.41, 20.20% respectively which was authenticated by EDS. Its effect on okra (Abelmoschus esculentus) plant showed higher growth (1.11 fold fruit size) and total chlorophyll content (1.61 fold) than in untreated soil (control) but displayed similar result as in presence of chemical fertilizer. The released free ammonia in soil with bio-organic NPK was more (37.02%) than with chemical fertilizer (6.10%). DNA intercalation study showed the non-hazardous impact on soil. The FTIR, XRD, SEM-EDS, AAS further specified the conversion of the WBL extracted acidic chromium-rich solution by MgO into crystalline chromium for commercial use.

Mechanistic insight for DBP induced growth inhibition in Vigna radiata via oxidative stress and DNA damage.

Chlorination is important to the safeness of recouped water; though it shows concern about disinfection by-products (DBPs) formation and its toxic effects. DBPs generation mostly specified by category of disinfectant utilized and naturally occurring organic matter present in the water pre and post disinfection. Plants are exposed to diverse stresses of environment across their lifespan. Reactive oxygen species (ROS) perform significant roles in preserving ordinary plant growth and enhancing their tolerance towards stress. This study is focused on the generation and elimination of ROS in apical meristematic growth and responses in Vigna radiata towards DBPs exposure. Phytotoxic and genotoxic effect of selected DBPs, TCAA (trichloroacetic acid), TCM (trichloromethane), TBM (tribromomethane) revealed concentration-dependent root length inhibition, germination index, vigour index, tolerance index, root/shoot ratio with higher EC50 value for TCM (6000 mg/L, 50.26 mM) over TCAA and TBM (1850 mg/L, 11.32 mM; 4000 mg/L, 15.83 mM). DNA laddering assay demonstrated DBP induced DNA damage to be concentration-dependent too. The concentration-dependent increase in the lipid peroxidation, H2O2 generation for each DBPs examined with highest oxidative stress for TCAA over TBM and TCM at fixed concentration illustrates that possible mechanism behind observed toxicity may be via ROS. Its regulation by antioxidative defense enzymes activities can be attributed to observed decline in these enzymes (catalase, ascorbate peroxidase, guaiacol peroxidase) activities with increasing concentration again where TCAA found more significantly affected than TBM and TCM over control. Results thus provide a useful understanding of the mechanism of DBP induced phytotoxicity and genotoxicity in V.radiata.

Efficacy of spent tea waste as chemically impregnated adsorbent involving ortho-phosphoric and sulphuric acid for abatement of aqueous phenol-isotherm, kinetics and artificial neural network modelling.

The current study emphasises on sorptive expulsion of phenol from aqueous solution using ortho-phosphoric acid (STAC-O) and sulphuric acid (STAC-H)-activated biochar derived from spent tea waste. STAC-O and STAC-H were instrumentally anatomised using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), BET surface area and thermal gravimetric analyser. Equilibrium and kinetic data were implemented for the investigative parametric batch study to prospect the influence of adsorbent dosage, contact time, initial concentration and pH for eradication of phenol from aqueous solution. The maximum phenolic removals by STAC-O and STAC-H are 93.59% and 91.024% respectively at the parametric conditions of adsorbent dosage 3 g/l time 2 h, initial phenol concentration 100 mg/l and pH 8. Non-linear regression of adsorption isotherms and kinetics was accomplished using the equilibrium data. Both the specimens were compared, and it delineated that Temkin isotherm model is contented. The maximum adsorption intakes for STAC-H and STAC-O were 185.002 mg/g and 154.39 mg/g respectively. Pseudo-second-order kinetic model was best fitted for portraying the chemisorption phenomena. Boyd kinetic and intra-particle diffusion model were investigated to elucidate the diffusion mechanism involved in the process. Desorption study was employed for determining the regeneration proficiency of the adsorbents using water, ethanol and NaOH with maximum 93% and 51.16% extrusion for STAC-O and STAC-H respectively. The process parameters involved in this study were further analysed using artificial neural network perusal to determine the input-output relationships and data pattern. The overall adsorption study along with cost estimation exhibited that bidirectional activation of spent tea biochar was prospective in abatement of phenol from aqueous media.

Cetylpyridinium bromide assisted micellar-enhanced ultrafiltration for treating enrofloxacin-laden water.

The presence of a fluoroquinolone base veterinary antibacterial drug enrofloxacin in aqueous media poses a major threat due to its ecotoxicity on aquatic microbiota. Hence, for the first time, an attempt was made to remove enrofloxacin (ENX) from its aqueous solution by employing micellar-enhanced ultrafiltration (MEUF) where cetylpyridinium bromide (CPB), a cationic surfactant was used for micellization. Response surface methodology (RSM) with central composite design (CCD) approach was applied to design the experiment, and to optimize the process parameters, namely, ENX concentration (3-15 mg/L), transmembrane pressure (2-6 kgf/cm2), recirculation flow rate (5.5-7.5 L/min) and CPB concentration (1.4-4.2 mM). The objective of this study was to maximize the permeate flux and rejection coefficient and to find out the optimal process condition for the removal of enrofloxacin from aqueous solution. Though maximum 68.23 L/m2 h of permeate flux and 94.20% of rejection coefficient were achieved at different process conditions, the optimization study reveals that the predicted optimal values of permeate flux and rejection coefficient are 67.53 L/m2 h and 89.67% respectively. Modelling was also carried out with the aid of artificial neural network (ANN) to validate the prediction of RSM. The predictability of the model by RSM and ANN was compared statistically by evaluating root-mean-square error (RMSE), absolute average deviation (AAD) and mean absolute error (MAE), where ANN exhibited better predictability. The following set of parameters was proposed for industrial scale up: ENX concentration of 8.4 mg/L, TMP of 5 kgf/cm2, recirculation flow rate of 6 L/min and CPB concentration of 2.1 mM.

Commercial application of cellulose nano-composites - A review.

Cellulose is the biosynthetic product from plants, animals and bacteria. Cellulose is the most abundant polymer having long linear chain like structure composed of (1,4) linked ß-D glucopyranosyl units assembled into hierarchical structures of microfibrils with excellent strength and stiffness. And 'nanocellulose' refers to the cellulosic materials with defined nano-scale structural dimensions. They may be cellulose nanocrystal (CNC or NCC), cellulose nanofibers (CNF) or bacterial nanocellulose. Nanocellulose is non-toxic, biodegradable and biocompatible with no adverse effects on health and environment. Due to its low thermal expansion coefficient, high aspect ratio, better tensile strength, good mechanical and optical properties, they find many applications in thermo-reversible and tenable hydrogels, paper making, coating additives, food packaging, flexible screens, optically transparent films and light weight materials for ballistic protection, automobile windows. It also find potential in biopharmaceutical applications such as in drug delivery and for fabricating temporary implants with PHB like sutures, stents etc.

Comprehensive analysis on sorptive uptake of enrofloxacin by activated carbon derived from industrial paper sludge.

The current investigation deals with how chemically activated carbon derived from industrial paper sludge (ACPS) performs on sorptive removal of enrofloxacin (ENF), an antibacterial drug from its water solution. Thermogravimetric (TGA) and proximate analysis of raw paper sludge (RPS) were conducted. ACPS was characterized with proximate analysis, XRD, FT-IR, SEM and BET. The influence of five operational parameters viz. adsorbate concentration (initial), dose of adsorbent, pH, temperature, and contact time on the adsorption of ENF onto ACPS has been conducted using batch experiments. The process of adsorption was optimized through ANN (artificial neural network) in addition to RSM (response surface methodology). The maximum percentage removal (95.85%) was achieved at initial ENF concentration 12 mg/g, adsorbent dose 1.2 g/L, contact duration of 18 h and temperature 20 °C. Kinetic data were best fitted into pseudo-second order kinetic model and adsorption equilibrium study indicates that the adsorption process follows Langmuir isotherm model. Adsorption capacity was noted to have a highest value of 44.44 mg/g. A study on thermodynamics of the adsorption process suggests that it exhibits spontaneity, being essentially exothermic. Cost analysis and reusability study confirm that adsorbent produced from industrial paper sludge is cost-effective and reusable. Therefore, ACPS as adsorbent has potency for removing ENF from aqueous solution.

Environmental risk appraisement of disinfection by-products (DBPs) in plant model system: Allium cepa.

The organic toxicants formed in chlorinated water cause potential harm to human beings, and it is extensively concentrated all over the world. Various disinfection by-products (DBPs) occur in chlorinated water are genotoxic and carcinogenic. The toxicity is major concern for chlorinated DBPs which has been present more in potable water. The purpose of the work was to evaluate genotoxic properties of DBPs in Allium cepa as a plant model system. The chromosomal aberration and DNA laddering assays were performed to examine the genotoxic effect of trichloroacetic acid (TCAA), trichloromethane (TCM), and tribromomethane (TBM) in a plant system with distinct concentrations, using ethyl methanesulfonate (EMS) as positive control and tap water as negative control. In Allium cepa root growth inhibition test, the inhibition was concentration dependent, and EC50 values for trichloroacetic acid (TCAA), trichloromethane (TCM), and tribromomethane (TBM) were 100 mg/L, 160 mg/L, and 120 mg/L respectively. In the chromosome aberration assay, root tip cells were investigated after 120 h exposure. The bridge formation, sticky chromosomes, vagrant chromosomes, fragmented chromosome, c-anaphase, and multipolarity chromosomal aberrations were seen in anaphase-telophase cells. It was noticed that with enhanced concentrations of DBPs, the total chromosomal aberrations were more frequent. The DNA damage was analyzed in roots of Allium cepa exposed with DBPs (TCAA, TCM, TBM) by DNA laddering. The biochemical assays such as lipid peroxidation, H2O2 content, ascorbate peroxidase, guaiacol peroxidase, and catalase were concentration dependent. The DNA interaction studies were performed to examine binding mode of TCAA, TCM, and TBM with DNAs. The DNA interaction was evaluated by spectrophotometric and spectrofluorometric studies which revealed that TCAA, TCM, and TBM might interact with Calf thymus DNA (CT- DNA) by non-traditional intercalation manner.

Biodegradation of alkali lignin by Bacillus flexus RMWW II: analyzing performance for abatement of rice mill wastewater.

A potential bacterium Bacillus flexus RMWW II has been isolated from rice mill effluent, and examined for its decolorizing potential for lignin-mimicking dyes. The biodegradation of alkali lignin by the rod-shaped, Gram-positive, oxidase and catalase-positive Bacillus flexus RMWW II bacteria is due to its uptake of lignin as the sole carbon source. The lignin degradation was 100% at a lignin concentration of 50 mg L-1 but the degradation reduced to 20% at 400 mg L-1. The bacterial-mediated biodegradation of alkali lignin was suitably explained by the Edward kinetics model with a maximal specific biodegradation rate (qmax) of 0.056 h-1 and true specific biodegradation rate (q*) of 0.042 h-1. The non-toxic nature of the metabolites of alkali lignin after bacterial degradation was illustrated by phytotoxicity studies. This bacterium was utilized to treat complex rice mill wastewater, as lignin is one of the major components of the effluent. A considerable reduction of 84% of chemical oxygen demand (COD) was observed in a batch reactor in 70 h of operation. The bacterial treatment results for the actual rice mill effluent indicate that Bacillus flexus RMWW II could be a promising agent for microbial remediation of lignin-laden raw rice mill wastewater.

Interlining Cr(VI) remediation mechanism by a novel bacterium Pseudomonas brenneri isolated from coalmine wastewater.

A bioremedial approach was investigated on the removal of Cr(VI) from aqueous solution using a novel chromium reducing bacteria isolated from coalmine wastewater. Cr(VI) removal efficacy of the bacterium was determined in a series of batch studies under the influence of various parameters viz., pH (1-7), temperature (20-40 °C), initial metal concentration (1-150 mg/L), agitation speed (80-150 rpm) and substrate concentration (1-5 mg/L). Oxygen involvement in the removal process was determined by different incubation conditions. Substrate consumption and its resultant biomass generation were considered for determining the viability of the microbe under varied metal concentration. The microbial isolate survived in Cr(VI) tainted solution with initial concentration of 1-140 mg/L, among which maximum remediation was found in 60 mg/L Cr(VI) loaded solution. The bacterial species also survived in other metal solution viz., Fe(II), As(V), Cu(II), Pb(II), Zn(II), Mg(II), Mn(II) apart from Cr(VI). Multiple approaches were tested to facilitate understanding of the bacterial Cr(VI) removal mechanism. The bacteria accumulated metal ions in the exponential growth phase both on and within the cell. Underlying latent factors which governed the bacterial growth and its removal activity was determined with the classical Monod equation. The isolated bacterium also survived in the bimetallic solutions with significant removal of Cr(VI). The microbial species isolated from mining area was identified as Pseudomonas brenneri by 16s rRNA molecular characterization. Hence, the isolated novel bacterium illustrated promising involvement towards bio-treatment of Cr(VI) laden wastewater.

Economic and sustainable management of wastes from rice industry: combating the potential threats.

Rice is one of the imperative staple foods, particularly in the developing countries. The exponential boom in human population has resulted in the continuous expansion in the rice industry in order to meet the food demands. The various stages of paddy processing release huge quantity of solid wastes, mainly rice husk, rice husk ash and liquid wastes in the form of rice industry wastewater. The discharge of the rice industry wastewater imparts a substantial threat to the aquatic bodies and the nearby surrounding and, thus, consequently demands eco-benign treatment plan. As a result, different strategies are needed to enhance the effluent quality and minimize the operational cost of the treatment process. Therefore, efficient technological approach targeting the minimization of pollution as well as assuring the economic prosperity should be implemented. In this review article, several aspects related to the rice industry discussing the significant challenges involved in the generation of both solid and liquid wastes, mitigation experiments and future prospects have been meticulously elaborated. Furthermore, the article also focuses on the various processes utilized for reducing the pollution load and promoting the practice of reuse and recycle of waste rather than the discharge action for the sake of sustainability and the emergence of novel techniques for the generation of energy and value-added products.

Optimization of Fe2+ Removal from Coal Mine Wastewater using Activated Biochar of Colocasia esculenta.

The present study investigates the sorptive removal of Fe2+ from simulated coal mine waste water using steam activated biochar (SABC) developed from the roots of Colocasia esculenta. The process was optimized by response surface methodology (RSM) under the influence of pH, temperature, adsorbent dosage and contact time at a constant shaking speed of 180 rpm with an initial concentration of 3 mg/L. The uptake performance of the biosorbent was assessed following a 24 full factorial experimental matrix developed by central composite design approach. Adsorbent was characterised by SEM, EDAX, XRD and B.E.T surface area analyzer. Maximum removal of 72.96% of Fe2+ was observed at pH 7.75, temperature 37.5 °C, adsorbent dosage 1.5 g/L for a time period of 180 mins. The study suggested that SABC prepared from roots of Colocasia esculenta could be used as an efficient and cost effective sorbent for removal of Fe2+ from coal mine wastewater.

Insight into Cr6+ reduction efficiency of Rhodococcus erythropolis isolated from coalmine waste water.

A microbial treatment of Cr6+ contaminated wastewater with a chromium reducing bacteria isolated from coal mine area was investigated. In a series of batch study metal removal was executed under different parametric conditions which include pH (2-7), temperature (20-50 °C), initial Cr6+ concentration (1-100 mg/L), substrate utilization and its overall effect on biomass generation. Impact of oxygen availability was checked at different agitation speed and its role on the remedial process. Liquid phase reduction of Cr6+ was measured in terms of substrate reduction and total biomass yield. The bacterium species isolated was able to tolerate Cr6+ over a wide range from 1 to 100 mg/L before it reached minimum inhibition concentration. Apart from Cr6+, the bacterial isolate showed tolerance towards Fe, As, Cu, Ag, Zn, Mn, Mg and Pb. Removal mechanism adopted by the bacterium recommended that it employed accumulation of Cr6+ as Cr3+ both within and outside the cell. Classical Monod equation was used to determine the biokinetics of the bacterial isolate along with the interference of metal ion concentration and substrate utilization. Cr6+ removal was found prominent even in bimetallic solutions. The bacterial isolate was confirmed to be Rhodococcus erythopolis by 16s rRNA molecular characterization. Thus the bacterial isolate obtained from the coal mine area proved to be a potential agent for microbial remediation of Cr6+ laden waste water.

Unleashing the potential of ligninolytic bacterial contributions towards pulp and paper industry: key challenges and new insights.

Lignocellulose biomass predominantly constitutes the main feedstock for pulp and paper industry. Though some products of pulp and paper industry require the presence of lignin content, for most of the useful products formation lies in the efficient and selective removal of lignin component to make use of the intact cellulose fraction during the pretreatment of pulp. Lignin is a recalcitrant heteropolymer comprised of several complex stable bonds and linkages. The chemicals or intense energy processes used for delignification process release the hazardous chemicals compounds in the wastewater which cause toxicity and environmental pollution. The implementation of bacterial species has elucidated an effective approach in the generation of value-added products while degrading lignin from pulp biomass as well as detoxification of effluent. The direct use of bacterial cells in lignocellulose biomass and wastewater streams is promising as it outperforms the practical and technical constraints largely confronted by fungal and enzymatic means. The present review paper thus unleashed the potential of ligninolytic bacteria towards delignification of pulp biomass and treatment of effluent together with bioconversion of biomass and lignin into value-added products. Graphical abstract Schematic illustration of potential possible contribution of ligninolytic bacteria towards pulp and paper industry.

Current techniques in rice mill effluent treatment: Emerging opportunities for waste reuse and waste-to-energy conversion.

Rice mills release huge volumes of wastewater and other by-products when processing paddy rice. The wastewater often contains toxic inorganic and organic contaminants which cause environmental damage when released. Accordingly, cost-effective techniques for removing contaminants are needed. This article reviews current processes for curbing pollution and also reusing and recycling waste products. Novel techniques exist for converting waste products into energy and value-added products.

Biosorptive uptake of Fe(2+), Cu(2+) and As(5+) by activated biochar derived from Colocasia esculenta: Isotherm, kinetics, thermodynamics, and cost estimation.

The adsorptive capability of superheated steam activated biochar (SSAB) produced from Colocasia esculenta was investigated for removal of Cu(2+), Fe(2+) and As(5+) from simulated coal mine wastewater. SSAB was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and Brunauer-Emmett-Teller analyser. Adsorption isotherm indicated monolayer adsorption which fitted best in Langmuir isotherm model. Thermodynamic study suggested the removal process to be exothermic, feasible and spontaneous in nature. Adsorption of Fe(2+), Cu(2+) and As(5+) on to SSAB was found to be governed by pseudo-second order kinetic model. Efficacy of SSAB in terms of metal desorption, regeneration and reusability for multiple cycles was studied. Regeneration of metal desorbed SSAB with 1 N sodium hydroxide maintained its effectiveness towards multiple metal adsorption cycles. Cost estimation of SSAB production substantiated its cost effectiveness as compared to commercially available activated carbon. Hence, SSAB could be a promising adsorbent for metal ions removal from aqueous solution.

Reactive red 120 retention through ultrafiltration enhanced by synthetic and natural polyelectrolytes.

Two cationic chelating polymers, namely synthetic polyethylenimine (PEI), and biopolymer chitosan were employed in the present study to bring about the retention of anionic reactive red 120 (RR 120) from its aqueous solutions by way of polymer enhanced ultrafiltration (PEUF). The effects of process parameters, namely, cross-flow rate, transmembrane pressure, time, polyelectrolyte loading, and ionic strength on dye retention and permeation flux were examined. PEI enhanced ultrafiltration achieved dye retentions as high as 99.9%, and significant permeation fluxes around 148 L/m(2)h. However, in case of chitosan, relatively low retention (88%), and flux (120 L/m(2)h) levels were observed. A careful comparison of the changes induced in the UV-vis spectra of RR 120 by PEI and chitosan indicated a predominant electrostatic interaction between PEI and RR 120, as opposed to the relatively weak and sterically as well as chemically hindered interaction between chitosan and the dye ion. The respective binding constants of PEI-RR 120, and PEI-chitosan complexes, in addition to the relatively more pronounced permeation flux decline witnessed in the presence of chitosan, clearly advocated the use of PEI, rather than chitosan, as the most appropriate complexing agent in the present context.

Designing polymeric microparticulate drug delivery system for hydrophobic drug quercetin.

The aim of this study was to investigate pharmaceutical potentialities of a polymeric microparticulate drug delivery system for modulating the drug profile of poorly water-soluble quercetin. In this research work two cost effective polymers sodium alginate and chitosan were used for entrapping the model drug quercetin through ionic cross linking method. In vitro drug release, swelling index, drug entrapment efficiency, Fourier Transforms Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and Differential Scanning Calorimetric (DSC) studies were also done for physicochemical characterization of the formulations. Swelling index and drug release study were done at a pH of 1.2, 6.8 and 7.4 to evaluate the GI mimetic action which entails that the swelling and release of the all the Formulation1 (F1), Formulation2 (F2) and Formulation3 (F3) at pH 1.2 were minimal confirming the prevention of drug release in the acidic environment of stomach. Comparatively more sustained release was seen from the formulations F2 & F3 at pH 6.8 and pH 7.4 after 7 h of drug release profiling. Drug entrapment efficiency of the formulations shows in F1 (D:C:A = 2:5:30) was approximately 70% whereas the increase in chitosan concentration in F2 (D:C:A = 2:10:30) has shown an entrapment efficiency of 81%. But the comparative further increase of chitosan concentration in F3 (D:C:A = 2:15:30) has shown a entrapment of 80% which is not having any remarkable difference from F2. The FTIR analysis of drug, polymers and the formulations indicated the compatibility of the drug with the polymers. The smoothness of microspheres in F2 & F3 was confirmed by Scanning Electron Microscopy (SEM). However F1 microsphere has shown more irregular shape comparatively. The DSC studies indicated the absence of drug-polymer interaction in the microspheres. Our XRD studies have revealed that when pure drug exhibits crystalline structure with less dissolution profile, formulated microparticles can help us to obtain amorphous form of the same drug that is likely to have more dissolution property. The findings of the study suggest that the microsphere formulations were a promising carrier for quercetin delivery and can be considered as a favorable oral controlled release dosage form for hydrophobic drug quercetin.